Top!
Problem solved.
Now I see in domoticz under tab Temperature
the value for temperature en humidity
Very thanks!

I download from github: ESPEasy-1-bugfix-P153-fix-wrong-sensor_vtype.zip
Where can I find the right binaire file?

Thanks!
I will try when GH Actions run is finished. When is ready?

Jack

Hi all, I connected an SHT45 sensor at an Wemos D1 mini pro with firmware ESP_Easy_mega_20230822_climate_ESP8266_4M1M. I2C address 0x44 (68) default The temperature and humidity values are visible under devices in the sketch of the Wemos IP address. 26.3 and 48 In domoticz under Devices I see by dat...

The problems with flashing are solved! 1. Disable AVG Internet Security. 2. Connect the GIO0 of the esp6288 too ground. 3. Connect the esp6288 too an USB port of the PC 4. Start Tasmotizer 1.2, select the right com port . 5. Select the right easy esp bin file. 6. Select "Erase before flashing&q...

I can't replace the firmware using the Tools page button Update Firmware because my router didn't found the esp6288.

Hi, I bought two LOLIN D1 mini pro and two Wemos D1 mini pro and flashed this four pieces with easy esp software. But after reboot of the ESP6228 I don’t get ESP_Easy_0. I disable my AVG anti virus and firewall, but no results. After several attemps can’t flash on. Not even by putting the GIO0 pin o...

He don't accept this password.

Hi,

Just I flashed my Lolin D1 mini pro with easy esp software "ESP_Easy_mega_20220809_collection_D_ESP8266_4M1M.bin".
After reboot I see wifi collection-D.
But for connection he ask an password.
What is the password?

Thanks,
Jack

Hi,

I bought the BMP388 breakout. Connect to an Wemos D1 pro with the last EasyESP.
I select Device "BMx280", but the values show 0.00.
When I select I2C scan I see the adres 0x77.
What goes wrong?

Grtz,
Jack

Thanks!!
Solved.

What must I fill in the field: Aslabel under create vitual sensor?

The senseair S8 sensor

Hi, Today I connected an senseair S8 to an wemos with Easy ESP. I see the CO2 value under device in the Easy ESP software. In Domoticz the CO2 stays at zero and will not change. The IDX number is correct. Both in Easy ESP and Domoticz. In the log of the Easy ESP I see the rules: 2504445: Senseair: c...