Can you use a multimeter to read what RJ45 pins actually end up on the PoE+ and PoE- ?
We are hoping for RJ45 pins 4,5 to lead to PoE+ and pins 7,8 to PoE-
Search found 221 matches
- 26 Jan 2024, 13:01
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
- 26 Jan 2024, 09:21
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
Re: ETH01-EVO ESP32-C3 + DM9051 SPI eth
https://www.aliexpress.com/item/1005006257748744.html What are the chances of supporting this soon ? Just bought it on Ali, ETA (of the board) is 12th of Jan. Have you received this ? Images show a very proprietary PoE doing Vcc on pin 7 and return on pin 8 when anything else in terms of PoE (eithe...
- 25 Jan 2024, 21:23
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
- 25 Jan 2024, 14:36
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
Re: ETH01-EVO ESP32-C3 + DM9051 SPI eth
More than 1 bridged ETH devices (switch) or treated as separated interfaces each one with its own properties ?
- 07 Jan 2024, 22:09
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
The "X-mas" build has some funky defaults. This should be fixed in the latest test build. See: https://td-er.nl/ESPEasy/latest/ Or GH ACtions: https://github.com/letscontrolit/ESPEasy/actions/runs/7433945595 N.B. to properly test factory reset, you need to erase all flash. That's not alwa...
- 07 Jan 2024, 20:59
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
Reset it to default, boot it w/o eth, came up in AP mode but it skips the conf page, I get splashed directly to the "index" page, as if "Don't force /setup in AP-Mode" was ticked. Perhaps this is not included in the defaults ? Remains "null" when system expecting some v...
- 07 Jan 2024, 20:46
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
00:06:17.556 : (214604) Info : EVENT: Ethernet#Disconnected 00:06:34.819 : (214260) Info : WD : Uptime 7 ConnectFailures 0 FreeMem 214404 WiFiStatus: WL_DISCONNECTED 6 ESPeasy internal wifi status: DISCONNECTED This is the log file when I disconnect the eth port. Seems like it does not try to assoc...
- 01 Jan 2024, 19:08
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
It should, but it didn't.
My guess is that there might be some sort of setting issue as this is coming from a long history of updates (since the very first release) and I never performed any "Factory Reset"
- 31 Dec 2023, 16:29
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
Not really sure what I'm looking at. Just a gpiotoggle. The interesting part is the time it takes for the relay to toggle once it is submitted. I tried to put on on static IP to check whether this is related but has not come back since. Will need to dig up my USB to TTL module, most likely "ne...
- 31 Dec 2023, 15:42
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
Can you see on the switch whether the ETH unit connects at 10 Mbps or 100 Mbps? Or worse, does it constantly switch between those rates? I know this may happen if the supplied voltage is too low, but that is slightly unlikely when the unit was working fine on previous builds. Does the ESP supply th...
- 31 Dec 2023, 09:23
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
Just a thought, can you set on the Hardware tab to pull-up the ETH power pin at boot? This does enable the power for ETH a bit earlier, so it will allow for slightly more time to let the ETH chip "boot". No difference in the lag with or without the power pin. Just for clarification. The u...
- 31 Dec 2023, 08:56
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
- 30 Dec 2023, 16:46
- Forum: ESP Easy: Hardware
- Topic: ETH01-EVO ESP32-C3 + DM9051 SPI eth
- Replies: 27
- Views: 8425
ETH01-EVO ESP32-C3 + DM9051 SPI eth
https://www.aliexpress.com/item/1005006257748744.html
What are the chances of supporting this soon ?
What are the chances of supporting this soon ?
- 30 Dec 2023, 16:36
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 48926
Re: Hardware recommendation for Ethernet
Olimex ESP32-EVB Has anyone noticed significant "lag" in the system when connected via ETH in the newer builds ? I had normal response either way (WiFi or ETH) in earlier builds but not any longer (more than a year or so ago), although it works fine over WiFi it has significant lag when on...
- 21 Dec 2023, 20:24
- Forum: ESP Easy: General Discussion
- Topic: any open access point
- Replies: 4
- Views: 1918
Re: any open access point
Back in 2001 the 802.11b pcmcia cards of the day : Lucent / Orinoco/ Avaya / Agere (all the same) would connect to ANY available open AP when the card (client) SSID was set to ANY.
The wildcard of the SSIDs![Lach :)](./images/smilies/icon_e_smile.gif)
The wildcard of the SSIDs
![Lach :)](./images/smilies/icon_e_smile.gif)
- 24 Nov 2023, 15:12
- Forum: ESP Easy: Projects / Applications
- Topic: Power socket with display
- Replies: 6
- Views: 2605
Re: Power socket with display
You might want to go the other way around and install and ESP inside a wall plug power meter with display ?
https://gizmosnack.blogspot.com/2014/10 ... -hack.html
https://gizmosnack.blogspot.com/2014/10 ... -hack.html
- 27 Mar 2023, 11:46
- Forum: ESP Easy: General Discussion
- Topic: command exist for timezone ?
- Replies: 6
- Views: 1673
Re: command exist for timezone ?
Why do you want to change time zones manually ?
The nodes do not have Access to the internet ?
The nodes do not have Access to the internet ?
- 08 Mar 2023, 08:46
- Forum: ESP Easy: Software
- Topic: New feature requested: custom ESP Easy main web page
- Replies: 3
- Views: 1270
Re: New feature requested: custom ESP Easy main web page
If you upload an index.htm file then this automatically becomes your root / main page.
- 12 Feb 2023, 13:30
- Forum: ESP Easy: Software
- Topic: PostToHTTP
- Replies: 3
- Views: 1222
- 02 Feb 2023, 17:12
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Re: Connection issue on ETH static IP
Based on your responses all is fine, nothing wrong, no action need to be taken.
I just have to convince the ETH devices of this so they can fix themselves and start behaving the same as when on WiFi![Lach :)](./images/smilies/icon_e_smile.gif)
I just have to convince the ETH devices of this so they can fix themselves and start behaving the same as when on WiFi
![Lach :)](./images/smilies/icon_e_smile.gif)
- 02 Feb 2023, 14:59
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Re: Connection issue on ETH static IP
This is why I mentioned there is something wrong... none of this should have happened as there is no reason for any of this, yet all that activity is there and repeating
- 01 Feb 2023, 19:01
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Re: Connection issue on ETH static IP
I don't see why that should be an indication something is not right here? 1. I have never seen this on any of my other nodes. 2. This repeats in the logs every few seconds and the web UI becomes unusable for some seconds with great lag 3. This message goes away when on WiFi interface and web UI is ...
- 01 Feb 2023, 17:51
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Re: Connection issue on ETH static IP
Something is definitely not correct here. This is after a reset on DHCP ETH 131339: static_file: /esp.css 131340: Serve 304: 1675277250 /esp.css 135447: Webserver 1 Arguments: 0: 'fdm' length: 2 135560: static_file: /esp.css 135561: Serve 304: 1675277250 /esp.css 136578: Webserver 2 Arguments: 0: 'f...
- 31 Jan 2023, 19:53
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Re: Connection issue on ETH static IP
Same behavior in that release as well.TD-er wrote: ↑31 Jan 2023, 13:52 Can you also try a later build?
Sounds like an issue we fixed almost immediately after the 'christmas' build.
For example this GitHub Actions build: https://github.com/letscontrolit/ESPEas ... 4031976900
![Bedroeft :(](./images/smilies/icon_e_sad.gif)
- 31 Jan 2023, 13:33
- Forum: ESP Easy: Software
- Topic: Connection issue on ETH static IP
- Replies: 10
- Views: 2922
Connection issue on ETH static IP
My ESP32 ETH boards work great when on DHCP but can NOT access the web interface when setting them to static IP (even wen on the same subnet / physical) UDP/ P2P Networking works 20221224 10107 : Info : ETH event: Started 10107 : Info : ETH event: Connected 10153 : Info : Webserver: start 10155 : In...
- 28 Jan 2023, 16:22
- Forum: ESP Easy: General Discussion
- Topic: EspEasy sensor data to Tuya Platform
- Replies: 7
- Views: 2170
- 08 Jan 2023, 09:46
- Forum: RFlink: General Discussions
- Topic: Enet Smart Home (Jung / Gira)
- Replies: 1
- Views: 2036
Re: Enet Smart Home (Jung / Gira)
This sounds like the "inching" function has been enabled.
Should be in the device settings in the app
Should be in the device settings in the app
- 26 Dec 2022, 13:26
- Forum: ESP Easy: Software
- Topic: No ESP32 IR ETH ?
- Replies: 6
- Views: 2401
- 26 Dec 2022, 13:19
- Forum: ESP Easy: Software
- Topic: No ESP32 IR ETH ?
- Replies: 6
- Views: 2401
- 26 Dec 2022, 12:44
- Forum: ESP Easy: Software
- Topic: No ESP32 IR ETH ?
- Replies: 6
- Views: 2401
No ESP32 IR ETH ?
Seems like there is no ESP32 IR ETH build in the binaries ?
My Olimex ESP32-EVB have both Rx and Tx IR along with ETH
My Olimex ESP32-EVB have both Rx and Tx IR along with ETH
- 21 Dec 2022, 10:06
- Forum: ESP Easy: Software
- Topic: what is the password
- Replies: 4
- Views: 1601
- 05 Oct 2022, 12:10
- Forum: ESP Easy: Software
- Topic: set "Client IP block level" at flashing
- Replies: 11
- Views: 2754
Re: set "Client IP block level" at flashing
I login with my phone just to change that value, than back to desktop.
I requested the change to default ALL some time ago but no luck.
I requested the change to default ALL some time ago but no luck.
- 05 Oct 2022, 11:48
- Forum: ESP Easy: Software
- Topic: Matter 1.0 Certified
- Replies: 1
- Views: 1952
- 15 Sep 2022, 19:45
- Forum: ESP Easy: General Discussion
- Topic: MCP Status without device
- Replies: 4
- Views: 2797
Re: MCP Status without device
You initiate monitor at/after boot ?
Monitor,MCP,<MCPGPIO>
Monitor,MCP,<MCPGPIO>
- 03 Aug 2022, 15:19
- Forum: ESP Easy: Hardware
- Topic: Distance Sensor A02YYUW
- Replies: 28
- Views: 28429
- 31 Jul 2022, 10:34
- Forum: RPiEasy: General Discussion
- Topic: new micropython based mpeasy-async
- Replies: 5
- Views: 3930
Re: new micropython based mpeasy-async
What is your PICO vendor of choice ?
- 18 Mar 2022, 23:19
- Forum: ESP Easy: General Discussion
- Topic: Seeking Home Automation Advice
- Replies: 79
- Views: 50945
Re: Seeking Home Automation Advice
In the last 10 years of IoT experience I have gradually migrated away from WiFi nodes. So for me, "production" units means Zigbee / Z-Wave and wired nodes. Zigbee mainly due to MESH protocol, very small overhead, long battery life, widely available nodes and competitive prices. Wired nodes...
- 03 Mar 2022, 16:34
- Forum: ESP Easy: General Discussion
- Topic: timer problem
- Replies: 7
- Views: 6233
Re: timer problem
Code: Select all
on Niveau#Niveau = 0 do
gpio,14,0
endif
- 02 Mar 2022, 18:02
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
Re: maybe easier to use Dashboard replacement
Definitely needs detailed documentation.
I have been following it from the start and I have to go over a collection of older posts to get working now.
I have been following it from the start and I have to go over a collection of older posts to get working now.
- 02 Mar 2022, 13:40
- Forum: ESP Easy: General Discussion
- Topic: Problem with access via the Web interface
- Replies: 7
- Views: 7415
- 02 Mar 2022, 11:02
- Forum: ESP Easy: General Discussion
- Topic: Problem with access via the Web interface
- Replies: 7
- Views: 7415
- 21 Feb 2022, 19:56
- Forum: ESP Easy: Hardware
- Topic: Dingtian IOT Relay
- Replies: 63
- Views: 34884
Re: Dingtian IOT Relay
Makes sense and will prove this point (or not).
Will try to make the time for this tomorrow.
Will try to make the time for this tomorrow.
- 21 Feb 2022, 19:37
- Forum: ESP Easy: Hardware
- Topic: Dingtian IOT Relay
- Replies: 63
- Views: 34884
Re: Dingtian IOT Relay
But Steven's software design works in this hardware setup.
I have been meaning to remove the ESP32 and flash it as a standard unit, then solder it back but not found the time yet.
I think once the node is initialized apart from the main PCB, then it will boot as expected.
I have been meaning to remove the ESP32 and flash it as a standard unit, then solder it back but not found the time yet.
I think once the node is initialized apart from the main PCB, then it will boot as expected.
- 21 Feb 2022, 14:14
- Forum: ESP Easy: Hardware
- Topic: Dingtian IOT Relay
- Replies: 63
- Views: 34884
Re: Dingtian IOT Relay
IO0 is used by LAN (RMII_RST) so I tend to believe my failed attempts are due to this https://docs.espressif.com/projects/esptool/en/latest/esp32/advanced-topics/boot-mode-selection.html Steven's (Dingtian guy) exact words were : "...For current relay board in your hand, it cannot support devel...
- 16 Feb 2022, 11:56
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
Re: maybe easier to use Dashboard replacement
@TD-er
After uploading a file :
"...
Upload OK!
You may need to reboot to apply all settings...Upload finished
..."
Make the "reboot" text into an actual reboot link please
After uploading a file :
"...
Upload OK!
You may need to reboot to apply all settings...Upload finished
..."
Make the "reboot" text into an actual reboot link please
- 16 Feb 2022, 11:52
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
- 01 Feb 2022, 10:56
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
Re: maybe easier to use Dashboard replacement
Seems like the event is not generated properly now ?
A local button event now results to this :
339179: HTTP: SendTo,undefined,'event,SysInfoEvent'
A local button event now results to this :
339179: HTTP: SendTo,undefined,'event,SysInfoEvent'
- 01 Feb 2022, 10:34
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
Re: maybe easier to use Dashboard replacement
Shouldn't the sidebar also be able to close from the same 3 bars it opens ? (from a desktop point of view)
- 31 Jan 2022, 20:24
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
- 30 Jan 2022, 20:16
- Forum: ESP Easy: Software
- Topic: maybe easier to use Dashboard replacement
- Replies: 188
- Views: 262121
Re: maybe easier to use Dashboard replacement
Should the first post be edited to include the last file and complete documentation as it has evolved so far ?