Hi Ath
Just a FYI
This was the 1st time i used a GPIO that is lower than GPIO10.
Search found 85 matches
- 20 Aug 2022, 11:49
- Forum: ESP Easy: General Discussion
- Topic: (Resolved) Rule not triggering - "on GPIO#04 do"
- Replies: 4
- Views: 2677
- 14 Aug 2022, 15:57
- Forum: ESP Easy: General Discussion
- Topic: (Resolved) Rule not triggering - "on GPIO#04 do"
- Replies: 4
- Views: 2677
Re: Rule not triggering - "on GPIO#04 do"
Hi Ath
Thank you.
I presumed that "on GPIO#04=0 do" must be the same format as "Monitor GPIO,04" with leading zero.
Changed "on GPIO#04=0 do" to "on GPIO#4=0 do" and it is now working.
Thank you.
I presumed that "on GPIO#04=0 do" must be the same format as "Monitor GPIO,04" with leading zero.
Changed "on GPIO#04=0 do" to "on GPIO#4=0 do" and it is now working.
- 14 Aug 2022, 14:15
- Forum: ESP Easy: General Discussion
- Topic: (Resolved) Rule not triggering - "on GPIO#04 do"
- Replies: 4
- Views: 2677
(Resolved) Rule not triggering - "on GPIO#04 do"
Hi All Have a strange one and i presume i am doing something wrong here. Rule 1 - This is working as i can see the event in the log file - EVENT: GPIO#4=0, EVENT: GPIO#4=1 on System#Boot do Monitor GPIO,04 endon Rule 2 - This rule is not triggering even though i see the GPIO=0 event in the logs on G...
- 17 May 2022, 22:13
- Forum: ESP Easy: Hardware
- Topic: Distance Sensor A02YYUW
- Replies: 28
- Views: 28502
Re: Distance Sensor A02YYUW
Thank you Ath
I am trying to do a build with A02YYUW included, but i have not done a custom build for some time now, a few years, so i need to get into Platformio as i have not used it before.
I am trying to do a build with A02YYUW included, but i have not done a custom build for some time now, a few years, so i need to get into Platformio as i have not used it before.
- 15 May 2022, 12:47
- Forum: ESP Easy: Hardware
- Topic: Distance Sensor A02YYUW
- Replies: 28
- Views: 28502
Re: Distance Sensor A02YYUW
Hi seb82
Would you mind sharing the bin file for the A02YYUW?
Would you mind sharing the bin file for the A02YYUW?
- 25 Oct 2021, 19:07
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
Re: How do i set a var# from the dashboard
Hi chromo23
Thank you for your time and effort, it is working 100%
Thank you for your time and effort, it is working 100%
- 23 Oct 2021, 11:05
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
Re: How do i set a var# from the dashboard
Hi chromo23 Yes, the page is loading now after i rename the file to x.html I can see that the variable is getting set, %v1% is the value that i enter and set. I can also see that in the "Devices" window, the value is displayed. I changed - kwRem = myJson.Sensors[5].TaskValues[0].Value - to...
- 21 Oct 2021, 22:35
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
Re: How do i set a var# from the dashboard
Hi chromo23
Do you mind sharing your setup?
Do you mind sharing your setup?
- 21 Oct 2021, 21:21
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
Re: How do i set a var# from the dashboard
Hi chromo23
When i try to run your example, my ESP load goes to 100%.
The web page eventually time-out and then the esp idle at about 15%.
I am using this build - ESP_Easy_mega_20211005_normal_ESP8266_4M1M
I load the esp.css and dashboard.esp files as i normally do, but this is not working for me.
When i try to run your example, my ESP load goes to 100%.
The web page eventually time-out and then the esp idle at about 15%.
I am using this build - ESP_Easy_mega_20211005_normal_ESP8266_4M1M
I load the esp.css and dashboard.esp files as i normally do, but this is not working for me.
- 20 Oct 2021, 21:11
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
Re: How do i set a var# from the dashboard
I am using my ESP as a kWh meter using the generic pulse counter. I have a "Pre-Pay" meter and i would like to load the kWh value of my pre-Pay meter every time i purchase electricity. I can then subtract from this "Loaded" value as the ESP counts the meter pulses. I was using an...
- 19 Oct 2021, 21:31
- Forum: ESP Easy: General Discussion
- Topic: How do i set a var# from the dashboard
- Replies: 14
- Views: 6745
How do i set a var# from the dashboard
Hi All
I would like to set var#1 value from the "Dashboard".
How do is set the value of a variable from the dashboard html page?
I would like to set var#1 value from the "Dashboard".
How do is set the value of a variable from the dashboard html page?
- 18 Jul 2021, 14:25
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er / Ath
Is there a way to get JSON format on HA mqtt?
Is there a way to get JSON format on HA mqtt?
- 18 Jul 2021, 13:38
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er As i indicated before, i did not see any history from the ESPEasy device when using MQTT Explorer and connected to HA Mosquitto broker. BUT i have had some success, not sure why, i need to do some RTFM to understand why... I removed - homeassistant/sensor/ from my settings and now i can see...
- 18 Jul 2021, 10:06
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi ThomasB In my 1st post i indicated that i use MQTT Exporer to connect to the Mosquitto broker in HA. There i can see my Electricity meter - esp8266 running Micropython - https://github.com/dalehumby/powermeter and my RPI Zero W running Node-RED sending serial data from my 16x current sensors. I d...
- 17 Jul 2021, 23:19
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er
No, TLS is not required.
On the RPI running Node-RED, the TLS option is not selected
I also run another ESP8266 that send my electricity meter readings to HA using this in micro python - https://github.com/dalehumby/powermeter
No, TLS is not required.
On the RPI running Node-RED, the TLS option is not selected
I also run another ESP8266 that send my electricity meter readings to HA using this in micro python - https://github.com/dalehumby/powermeter
- 17 Jul 2021, 22:16
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er I have "two" ways: 1. Rule - publish IP address on mqtt connect and then every 30 seconds On MQTT#Connected Do Publish,homeassistant/sensor/%sysname%/IP,%ip% timerSet,1,30 //Resets the Timer 1 for another 30 seconds EndOn On Rules#Timer=1 Do Publish,homeassistant/sensor/%sysname%/...
- 17 Jul 2021, 21:39
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi ThomasB
The ESP subscribe to both - homeassistant/sensor/%sysname% or homeassistant/sensor/%sysname%/#
So the "Subscribe" is working.
The issue is that i am not seeing any info in the HA mqtt.
The ESP subscribe to both - homeassistant/sensor/%sysname% or homeassistant/sensor/%sysname%/#
So the "Subscribe" is working.
The issue is that i am not seeing any info in the HA mqtt.
- 17 Jul 2021, 20:35
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er
Uncheck the extended credentials did not make any change.
ThomasB
If i change Controller Subscribe: homeassistant/sensor/%sysname%#
Then the HA Mosquitto does not accept the connection and the mqtt connection fail.
Uncheck the extended credentials did not make any change.
ThomasB
If i change Controller Subscribe: homeassistant/sensor/%sysname%#
Then the HA Mosquitto does not accept the connection and the mqtt connection fail.
- 17 Jul 2021, 19:37
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Hi TD-er If i do not enable "Extended Credentials" then i cant connect to HA Mosquitto as it has a username and password. This is what i see in the HA Mosquitto log - New client connected from 192.168.2.197 as homeassistant/sensor/Garage_Door (p2, c1, k10, u'mqtt'). On my PRI with Node-RED...
- 17 Jul 2021, 19:15
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
Re: ESPEasy - Home Assistant mqtt not working - What am i doing wrong?
Controller Settings Protocol: Home Assistant (openHAB) MQTT Locate Controller: Use IP address Controller IP: 192.168.2.200 Controller Port: 1883 Controller Queue Minimum Send Interval: 100 [ms] Max Queue Depth: 10 Max Retries: 10 Full Queue Action: Ignore New Allow Expire: De-duplicate: Check Reply...
- 17 Jul 2021, 18:39
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
- Replies: 21
- Views: 8786
ESPEasy - Home Assistant mqtt not working - What am i doing wrong? - Resolved
I am trying to get ESPEasy to connected to Home Assistant via MQTT. In the Mosquitto log in HA i can see that the ESP establish a connection and the controller Subscribe match my settings on the ESP - homeassistant/sensor/%sysname%, but i have not been able to get the info in HA. When i look at Mosq...
- 05 Jul 2021, 20:26
- Forum: ESP Easy: General Discussion
- Topic: Abnormalities when using an MCP23017 as out-/input
- Replies: 36
- Views: 17184
Re: Abnormalities when using an MCP23017 as out-/input
Hi Micha_he It might be a silly question but, have you pulled your MCP23017 address lines to the same GND as your ESP? For Address 1, all address lines of the MCP should be tied to GND - 0V I had a case where the MCP lines were floating, it worked 100% until there was a relay switched. The unit woul...
- 20 Jun 2021, 17:41
- Forum: ESP Easy: General Discussion
- Topic: How do i Limit login access?
- Replies: 3
- Views: 4127
Re: How do i Limit login access?
Hi TD-er
Something like an "Admin" login that has access to everything and then a "User" login where only certain pages is accessible to the "User".
Something like an "Admin" login that has access to everything and then a "User" login where only certain pages is accessible to the "User".
- 20 Jun 2021, 11:15
- Forum: ESP Easy: General Discussion
- Topic: How do i Limit login access?
- Replies: 3
- Views: 4127
How do i Limit login access?
Hi All
Is it possible to limit login access to only have access to Config page and noting else?
Is it possible to limit login access to only have access to Config page and noting else?
- 17 Jun 2021, 20:56
- Forum: ESP Easy: General Discussion
- Topic: Resolved - HiveMQ - What should the settings be?
- Replies: 5
- Views: 5016
Re: HiveMQ - What should the settings be?
Hi TD-er So out of desperation i loaded - ESP_Easy_mega_20210615_normal_ESP8266_4M1M via https://td-er.nl/ESPEasy/ And it work 1st time...??? Instant connect with no errors. So what has changed between ESPEasy_ESP82xx_mega-20210503 and ESP_Easy_mega_20210615_normal_ESP8266_4M1M? That will give clari...
- 16 Jun 2021, 22:37
- Forum: ESP Easy: General Discussion
- Topic: Resolved - HiveMQ - What should the settings be?
- Replies: 5
- Views: 5016
Resolved - HiveMQ - What should the settings be?
Hi All What should the "Controller" settings be to get HiveMQ to work. I have connected to HiveMQ from Node-RED to confirm the connection, but i am unable to get my ESP to connect: MQTT : Intentional reconnect MQTT : Broker C005 connection failed (6/0) I am using: ESP_Easy_mega_20201130_no...
- 14 Jun 2021, 20:14
- Forum: ESP Easy: General Discussion
- Topic: email - Error connecting... - Please help
- Replies: 7
- Views: 5627
Re: email - Error connecting... - Please help
Hi ThomasB
The version i am trying is: ESP_Easy_mega_20210223_normal_ESP8266_4M1M
I loaded the latest version - ESP_Easy_mega_20210503_normal_ESP8266_4M1M as well, changed the port to 587 and still the same error
The version i am trying is: ESP_Easy_mega_20210223_normal_ESP8266_4M1M
I loaded the latest version - ESP_Easy_mega_20210503_normal_ESP8266_4M1M as well, changed the port to 587 and still the same error
- 14 Jun 2021, 17:51
- Forum: ESP Easy: General Discussion
- Topic: email - Error connecting... - Please help
- Replies: 7
- Views: 5627
Re: email - Error connecting... - Please help
Hi ThomasB The "Security options that worked is: Port 25 and 2525 work on - Auto, Tls and Tls when available - None and SSL fail. Port 465 Work on Auto, SSL, the rest fail Port 587 Work on Auto, None,Tls and Tls when available, the rest fail I tried the smtp2go.com IP: 66.228.43.14 - and i get ...
- 13 Jun 2021, 21:18
- Forum: ESP Easy: General Discussion
- Topic: email - Error connecting... - Please help
- Replies: 7
- Views: 5627
Re: email - Error connecting... - Please help
Just a generic error message, irrespective of the debug level:
76954279: EMAIL: Connecting to mail.smtp2go.com2525
76954492: EMAIL: Error connecting to mail.smtp2go.com2525
I have tested the settings here - https://www.gmass.co/smtp-test and they work
76954279: EMAIL: Connecting to mail.smtp2go.com2525
76954492: EMAIL: Error connecting to mail.smtp2go.com2525
I have tested the settings here - https://www.gmass.co/smtp-test and they work
- 13 Jun 2021, 18:09
- Forum: ESP Easy: General Discussion
- Topic: email - Error connecting... - Please help
- Replies: 7
- Views: 5627
email - Error connecting... - Please help
Hi All I have been trying to use the smtp notification with out any success. I created an smtp2go account, setup a user and have a password from smtp2go. Domain: smtp2go.com Server: mail.smtp2go.com Port: 2525 Sender: xyz@gmail.com Receiver: zyx@yahoo.com Subject: Test Unit 1 User: smtp2go user name...
- 21 Jan 2021, 11:02
- Forum: ESP Easy: Projects / Applications
- Topic: Webserver HMI/GUI Code Generation Tool?
- Replies: 5
- Views: 18809
Re: Webserver HMI/GUI Code Generation Tool?
Hi All
Any progress on this?
Any progress on this?
- 27 Dec 2020, 10:55
- Forum: ESP Easy: General Discussion
- Topic: Rules Question - Can you do "Calculations" in rules?
- Replies: 2
- Views: 4228
Rules Question - Can you do "Calculations" in rules?
Hi All I have a rule that decode a mqtt event and split each of the 16 bits to switch a MCP23017 port On/Off, thanks to ThomasB - https://www.letscontrolit.com/forum/viewtopic.php?f=4&t=7988#p47122 I would like to display the "Calculated" value on a oled, each bit represent a different...
- 28 Nov 2020, 07:30
- Forum: ESP Easy: General Discussion
- Topic: MCP23017: Port control - not Pin control
- Replies: 9
- Views: 11447
Re: MCP23017: Port control - not Pin control
Hi ThomasB
Thank you, i finally managed to implement this and it works.
Thank you again for assistance.
Thank you, i finally managed to implement this and it works.
Thank you again for assistance.
- 01 Oct 2020, 21:47
- Forum: ESP Easy: General Discussion
- Topic: MQTT pin state on boot rule sort of working
- Replies: 1
- Views: 5400
MQTT pin state on boot rule sort of working
Hi all I need some pointers here please. I have a esp with this build - ESP_Easy_mega_20200801_normal_ESP8266_4M1M I have GPIO 13 set as "Output High" and GPIO 14 set as "Input" I have a rule to monitor GPIO 13 and 14 and it seems to work: on System#Boot do Monitor GPIO,13 Monito...
- 30 Sep 2020, 22:02
- Forum: ESP Easy: General Discussion
- Topic: MCP23017: Port control - not Pin control
- Replies: 9
- Views: 11447
Re: MCP23017: Port control - not Pin control
Hi Ath
Any pointers on how to do the "Port" part?
i tried to see if i can understand how to do it in P009, but i am not that good, need a lot of schooling on how to do that.
Just so i can control the port with one command instead of 16 to set / reset each pin
Any pointers on how to do the "Port" part?
i tried to see if i can understand how to do it in P009, but i am not that good, need a lot of schooling on how to do that.
Just so i can control the port with one command instead of 16 to set / reset each pin
- 29 Sep 2020, 22:44
- Forum: ESP Easy: General Discussion
- Topic: MCP23017: Port control - not Pin control
- Replies: 9
- Views: 11447
Re: MCP23017: Port control - not Pin control?
Hi Ath Rules.... not enough space as i have to set all 16 pin states for each of the 31 "MAP" values. Was thinking if it is possable to change P009 to include aditional command to set the "Port" instead of each pin - posted this on the GitHub as well. Send MCPPort instead of MCPG...
- 29 Sep 2020, 21:00
- Forum: ESP Easy: General Discussion
- Topic: MCP23017: Port control - not Pin control
- Replies: 9
- Views: 11447
Re: MCP23017: Port control - not Pin control
Hi Ath Yes, i looked at that, but i have 31 combenations that the ports need to be in, not just On/Off. Depecning on a input value of 0 to 30, there is a "MAP" value that the ports need to be in. That is why i was looking at sending a 16bit "Port" value as one comand instead of 1...
- 29 Sep 2020, 18:29
- Forum: ESP Easy: General Discussion
- Topic: MCP23017: Port control - not Pin control
- Replies: 9
- Views: 11447
MCP23017: Port control - not Pin control
Hi All
Is it possable to send one command to change all 16 I/O pins at once.
At the moment i send 16 commands MCPGPIO,1,1.....MCPGPIO16,1 via MQTT. I have 32ESP's and updating all the status is NUTS...
Any way of sending one command to change the output of all 16 I/O pins?
Z69
Is it possable to send one command to change all 16 I/O pins at once.
At the moment i send 16 commands MCPGPIO,1,1.....MCPGPIO16,1 via MQTT. I have 32ESP's and updating all the status is NUTS...
Any way of sending one command to change the output of all 16 I/O pins?
Z69
- 15 Aug 2020, 16:37
- Forum: ESP Easy: General Discussion
- Topic: Strobe / flash NeoPixel in Rules
- Replies: 2
- Views: 6567
Strobe / flash NeoPixel in Rules
Hi All Hope you can assist me here. I have a rule that monitor a pin, when the pin goes low(0), i switch a spesific NeoPixel on and when the pin goes high(1) i switch the NeoPixel off. This works, what i am trying to understand is how can i make the NeoPixel "Strobe / Flash" while it is on...
- 15 Aug 2020, 16:27
- Forum: ESP Easy: General Discussion
- Topic: Public poll about modem-router brands that work without problem with espeasy and domoticz
- Replies: 14
- Views: 11394
Re: Public poll about modem-router brands that work without problem with espeasy and domoticz
These Routers / AP's i have used without any issues
1. LinkSys WRT54G - Not new, but very stable
2. ASUS RT-N66U
3. Ubiquiti Unifi AP-AC Lite
So far i have had no issue with these units and ESPEasy are connecting to them without any issues that i have experianced thus far.
1. LinkSys WRT54G - Not new, but very stable
2. ASUS RT-N66U
3. Ubiquiti Unifi AP-AC Lite
So far i have had no issue with these units and ESPEasy are connecting to them without any issues that i have experianced thus far.
- 09 Aug 2020, 19:12
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
Re: mqtt rule - help needed
Hi All Thank you for the assistance thus far. - Just for FYI, "Old Engine" was NOT enabled before. So i started from scratch, wipe, re-programme - ESP_Easy_mega_20200703_normal_ESP8266_4M1M, board is from Electrodragon ESP8266 R3. Setup everything like it was before. Update Rules Set 1 and...
- 08 Aug 2020, 23:43
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
Re: mqtt rule - help needed
So i change the rule to switch on the "Blue" LED on mqtt connect, it didn't, so it seems that rules are not firing - but check in lower in log. On MQTT#Connected Do Publish,"%sysname%/%unit%/IP","%ip%" GPIO,2,0 timerSet,1,30 //Resets the Timer 1 for another 30 seconds E...
- 08 Aug 2020, 23:30
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
Re: mqtt rule - help needed
Hi TD-er
No spaces in sysname, sysname is only 4 alpha chars - Nuco
Wrapping them in quotes also did make any change.
I shall see if i can get some diagnostics going, but i suspect that the rule is not firing...
No spaces in sysname, sysname is only 4 alpha chars - Nuco
Wrapping them in quotes also did make any change.
I shall see if i can get some diagnostics going, but i suspect that the rule is not firing...
- 08 Aug 2020, 22:47
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
Re: mqtt rule - help needed
Hi Ath Sorry, i did not post the complete rule :( ---- On MQTT#Connected Do Publish,%sysname%/%unit%/IP,%ip% timerSet,1,30 //Resets the Timer 1 for another 30 seconds EndOn On Rules#Timer=1 Do Publish,%sysname%/%unit%/IP,%ip% timerSet,1,30 //Resets the Timer 1 for another 30 seconds EndOn ---- The o...
- 08 Aug 2020, 22:15
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
Re: mqtt rule - help needed
Hi grovkillen
As i said, i am doing something stupid...
On Rules#Timer=1 Do
Publish,%sysname%/%unit%/IP,%ip%
timerSet,1,30 //Resets the Timer 1 for another 30 seconds
EndOn
Still not working???
As i said, i am doing something stupid...
On Rules#Timer=1 Do
Publish,%sysname%/%unit%/IP,%ip%
timerSet,1,30 //Resets the Timer 1 for another 30 seconds
EndOn
Still not working???
- 08 Aug 2020, 19:12
- Forum: ESP Easy: General Discussion
- Topic: mqtt rule - help needed
- Replies: 15
- Views: 15709
mqtt rule - help needed
Hi All I presume i am doing something stupid... I am subscribed to mqtt and i can see my status, analog value and i can control GPIO over mqtt. I am trying to use a rule to send the IP address every 30 seconds as per the example under the rules, but i never see it triggered in the log or any info in...
- 03 Aug 2020, 22:56
- Forum: ESP Easy: General Discussion
- Topic: Analog mqtt message does not have unit number
- Replies: 7
- Views: 7120
Re: Analog mqtt message does not have unit number
Hi Ath In my setup, all the ESP's have the same Sysname and each one has it's own number as in 1,2,3... I have NOT set "Append Unit Number to hostname:" Here is my mqtt setup, i am still new to mqtt, but this work for me, if there is a better way i am open to any way to do it better. I had...
- 02 Aug 2020, 22:00
- Forum: ESP Easy: General Discussion
- Topic: Analog mqtt message does not have unit number
- Replies: 7
- Views: 7120
Re: Analog mqtt message does not have unit number
Please close the Topic, i have resolved the issue by making some changes to the mqtt subscribe topic
- 25 Jul 2020, 22:00
- Forum: ESP Easy: General Discussion
- Topic: Analog mqtt message does not have unit number
- Replies: 7
- Views: 7120
Re: Analog mqtt message does not have unit number
Hi Ath
ESP_Easy_mega_20200703_normal_ESP8266_4M1M
ESP_Easy_mega_20200703_normal_ESP8266_4M1M
- 25 Jul 2020, 13:20
- Forum: ESP Easy: General Discussion
- Topic: Analog mqtt message does not have unit number
- Replies: 7
- Views: 7120
Re: Analog mqtt message does not have unit number
Hi TD-er Here is my setup ESPEasy mqtt setup as Home Assistant (openHAB) MQTT Under "Devices" Analog input - internal, with "Send to Controller" enabled In mqtt - i use MQTT Explorer to see the info, the Analog value is posted under the Device name and not under the Unit number. ...